应注意不锈钢焊接的空气导管和阀门

 

Attention should be paid to stainless steel welded air ducts and valves

 

在安装不锈钢焊接的搅拌管时，应注意风口微风阀。

 

When installing the stainless steel welding mixing pipe, attention should be paid to the air vent valve.

 

 

 

1.安装风口

 

1. Install the air outlet

 

 

 

（1）风口安装后，应保持水平，垂直和牢固，其轮廓应平坦。

 

(1) After installation, the tuyere should be horizontal, vertical and firm, and its contour should be flat.

 

 

 

（2）如果有空调阀，应先安装空调阀框架，然后再安装叶片框架。 如果两者是为了统一的目的，那么它们应该在统一方面。

 

(2) If there are air conditioning valves, install the air conditioning valve frame first, and then install the blade frame. If the two are for the purpose of unification, then they should be in the aspect of unification.

 

 

 

（3）安装扩散器风口时，预留的孔应较大，以便留出一个位置来阻止扩散器的安装。

 

(3) When installing the diffuser air outlet, the reserved hole should be larger, so as to reserve a position to prevent the installation of the diffuser.

 

 

 

（4）出风口的安装位置应公平，并符合假设的要求，并且必须与不锈钢焊接搅拌管牢固牢固地连接。

 

(4) The mixing pipe shall be firmly welded to the stainless steel outlet and shall meet the requirements of fair installation.

 

 

 

2.安装空气阀

 

2. Install the air valve

 

 

 

（1）在安装之前，应仔细检查机架布局，定位组件等，确定机架布局是否牢固，定位组件是否准确，敏捷。

 

(1) Before installation, carefully check the rack layout and positioning components to determine whether the rack layout is firm and whether the positioning components are accurate and agile.

 

 

 

（2）空气阀应牢固且小心地与空气管连接。

 

(2) The air valve should be firmly and carefully connected to the air pipe.

 

 

 

（3）安装空气阀时，气阀的固定和组装应易于操作，并且目标的目的应与标记的目标的连接相同。

 

(3) When installing the air valve, the fixing and assembling of the air valve should be easy to operate, and the purpose of the target should be the same as the connection of the marked target.

 

 

 

（4）安装空气阀后，应在其外壳上说明要打开的目标的目的，程度等，并按要求进行操作。

 

(4) After installing the air valve, the target to be opened, the purpose and degree of opening shall be stated on its shell, and the operation shall be carried out according to the requirements.

 

 

 

3.安全港的步伐

 

3. The pace of safe harbor

 

 

 

（1）在操作之前，请停止搜索使用过的物品。 使用的设备也必须停止搜索和检查，并且可以毫无问题地使用。

 

(1) Please stop searching for used items before operation. The device used must also stop searching and checking, and can be used without problems.

 

 

 

（2）应按照规定使用机械设备，严禁非法操作。

 

(2) Mechanical equipment should be used according to regulations, and illegal operation is strictly prohibited.

 

 

 

（3）输送不锈钢焊扫时，可根据实际环境进行调配。 如果携带一根以上的风管，则应使用相同的力以避免损坏风管。

 

(3) When transporting stainless steel, it can be adjusted according to the actual environment. If more than one duct is carried, the same force should be used to avoid damaging the duct.

 

 

 

（4）不锈钢焊接搅拌管应轻拿轻放，并整齐堆放。

 

(4) Stainless steel welding mixing pipe should be handled with care and stacked in order.

 

 

 

（5）电线的配线应使维修人员停止操作，其他人员不能随意操作，也不能私自拉动电线以免接触。

 

(5) The wiring of wires should stop the operation of maintenance personnel. Other personnel should not operate at will or pull wires privately to avoid contact.

 

 

 

（6）严格按照施工标界和进度，停止施工，并由专人停止现场用电和用水。

 

(6) In strict accordance with the construction demarcation and progress, the construction shall be stopped, and the power and water consumption on site shall be stopped by special personnel.

 

 

 

（7）施工现场应配备灭火器，以免造成混乱。

 

(7) Fire extinguishers shall be provided at the construction site to avoid confusion.

 

 

 

（8）当日竣工后，未使用的物料应存放在仓库中，工具应恢复原位，不能随意放置。

 

(8) After the completion of the day, the unused materials shall be stored in the warehouse, and the tools shall be restored to their original position, and shall not be placed at will.